HP Color LaserJet 4550 printer family - Software Technical Reference

Printing system software components
HP Color LaserJet 4550 Software Technical Reference 61
Storage
In Storage, you can specify whether a hard disk is installed and whether Job Retention is
enabled. Job Retention is disabled by default. The printer hard disk control can be set
manually and are updated by a successful bidi query. Job Retention Enabled determines
whether Job Retention appears as a Destination Feature on the Destination tab. Because
this is the only possible Destination Feature for the HP Color LaserJet 4550 printer, this
also determines if the Destination Features group box appears on the Destination tab.
The Job Retention Enabled checkbox is disabled unless the More. . . dialog box of the
Configure tab indicates the printer has a hard disk and at least 64 MB of RAM installed.
When enabled, the Job Retention Enabled checkbox is not be checked by default.
When the Mopier Enabled or Job Retention Enabled checkboxes are disabled, a Bubble
Help icon appears next to the checkboxes, explaining that a printer hard disk and at least
64 MB of Total Printer Memory are required to enable these features.
Fonts
The second group box, Fonts, contains a Font DIMM checkbox and a corresponding
Configure... button. Checking the Font DIMM control tells the driver that a Font DIMM is
installed, and that stored data are available regarding which fonts are on the DIMM.
When the box is selected, the Configure Font DIMMs dialog box comes up or the
Configure button becomes enabled depending on the state of the Font DIMM checkbox
upon entering the More Config box.
Selecting the Configure button will open a dialog entitled Configure Font DIMMs. This
dialog is shown below in Figure 38.
Figure 38: The Configure Font DIMMs dialog
Additionally, you can do the following:
• Add up to two fonts DIMMs by clicking the Add button.
• Specify a unique font DIMM name.
• Select specific PFM files or HPD files. HPD files are predefined font DIMM data
files that the driver knows how to read, which contains a list of fonts on a
specified DIMM.
• Select one or more installed DIMMs in the Installed DIMM list, and based on the
selected DIMM(s); the list to the right (Fonts on DIMM) will display all of the fonts
available on the selected DIMM(s).