Manualshelf

HP Color LaserJet 4550 printer family - Software Technical Reference

ManualsBrandsHP ManualsPrinterHP Color LaserJet 4550 Printer
61626364656667686970
Printing system software components
HP Color LaserJet 4550 Software Technical Reference 64
never guaranteed, this query attempt might or might not be successful. If not, then none
of the configuration settings should change.
A successful bidi query updates all of the settings in the Printer Model, Paper Handling
Options, and Other Options group boxes on the Configure tab, as well as any custom
media type names. Automatic Configuration does not update configuration information
Font DIMMs. Automatic Configuration can enable does not select Mopier Enabled or Job
Retention Enabled.
NT Forms tab features
The NT Forms tab only appears in Windows NT. The NT Forms tab (like the Configure tab) can
be viewed only from the Properties window within the Printers folder. Figure 39 illustrates NT
Forms tab.
Figure 39: Driver NT Forms tab (all PCL drivers)
This tab allows you (or administrator) to specify which media sizes and types are loaded into
each of the available paper trays. The advantage of doing this is that it constrains the choices
available in the Size and Type lists on the Paper tab. This constraint prevents overwhelming the
printer with paper mount messages if you request sizes or types that are not available.
Available Trays is a drop-down list containing all printer trays specified on the Configure tab. This
Tray Contains/Size (Forms) contains standard HP Color LaserJet 4550 series-supported paper
sizes, as well as any custom forms that have been defined in the Forms tab. This Tray
Contains/Type lists all the media types supported by the HP Color LaserJet 4550 printer. The
Clear All button removes all size and type constraints in the Paper tab.
To configure the trays
1. Select the tray to configure from the "Available Trays:" list.
2. In the "Size (Forms):" list, select the paper size (or form) that is loaded into that
tray.
3. In the "Type:" list, select the paper type that is configured for that tray.
4. Repeat steps 1 through 3 for the remaining trays.