HP PCL/PJL reference (PCL 5 Printer Language) - Technical Reference Manual Part II

EN BZ, Bezier Absolute 20-23
PA1016,5080; Specify the absolute point
(1016,5080) as the starting location.
PR;PD; Specify relative plotting and pen
down.
BZ1016,8128,5588,5080,
4572,7112,4064,8128,
7112,7620,7112,2032; Draw a Bezier using the current
position (1016,5080) as the first
control point. The specified control
points for the first curve are
(1016,8128), (5588,5080), and
(4572,7112). The second curve uses
the last control point of the previous
curve as the first control point
(4572,7112). The other three control
points for the second curve are
(4064,8128), (7112,7620), and
(7112,2032).
E
C
%ØA Enter the PCL mode.
E
C
E Send a reset to end the job and eject
the page.
Table 20-14 Example: Using the BZ Command (Bezier Absolute)