HP PCL/PJL reference (PCL 5 Printer Language) - Technical Reference Manual Part II

EN Default Label Conditions 23-7
Default Label Conditions
The following label default conditions are established when the printer
is initialized, or set to default conditions. To change these settings,
refer to the appropriate chapter or command.
z Symbol Set (Character Set) — Roman-8.
z Font Spacing — Fixed.
z Pitch — 9 characters per inch.
z Height — 11.5 point.
z Posture — Upright.
z Stroke Weight — Medium.
z Typeface — HP-GL/2 Stick.
z Label terminator — ASCII end-of-text character ETX (decimal
code 3). Refer to the Define Label Terminator (DT) command.
z Label starting point — Current pen location (LO1). Refer to the
Label Origin (LO) command.
z Label direction — Horizontal. Refer to the DI, DR, and DV
commands.
z Space between characters and lines — Normal (no extra
space). Refer to the Extra Space (ES) command.
z Character Slant — None (vertical). Refer to the Character Slant
(SL) command.
z Character Fill Mode — Solid fill, no edging.
Shift In
2
15
Space 32
1. Equivalent to Select Alternate Font (SA) command.
2. Equivalent to Select Standard Font (SS) command.
Table 23-4 Commands Updating Carriage Return Point to
Current Location (continued)