HP PCL/PJL reference (PCL 5 Printer Language) - Technical Reference Manual Part II

23-58 The Character Group EN
Figure 23-31
LBLaserJetPrinters
CR-LF#;
Print “LaserJet Printers” in the currently
selected font, which is the default Stick
font; Carriage Return/Line Feed.
AD4,18;FN28;SA; Use the AD command to designate an
18-point font from within HP-GL/2 mode;
then assign the PCL font with font ID
number of 28 as the secondary font. Then
select the font.
LBLaserJetPrinters#; Print “LaserJet Printers” in the newly
selected font.
E
C
%0A Enter the PCL mode.
E
C
E Send a reset to end the job and eject the
page.
Table 23-31
Related Commands Group
AD, Alternate Font Definition The Character Group
LB, Label
SA, Select Alternate Font
SD, Standard Font Definition
SS, Select Standard Font
Table 23-30 Example: Using the FN Command