HP PCL/PJL reference (PCL 5 Printer Language) - Technical Reference Manual Part II

EN Index-19
user-units (pictured) 19-5
Screened Vectors command 22-39
screening (area fill) 22-39
SD command 23-68
example 23-73
secondary font 8-5, Glossary-10
HP-GL/2 23-56
HP-GL/2) 23-18
secured paper source 24-4
seed row 15-20, 15-22
adaptive compression 15-27
raster graphic termination 15-15
segment identifier, Format 15 11-40
segment size, Format 15 font header
11-41
segmented font data, Format 15 11-39
Select Alternate Font command 23-66
Select Current Pattern command 13-12
Select Default Font command 8-27
Select Pen (SP) command 22-5, 22-38
Select Primary Font command 23-54
Select Secondary Font command 23-56
Select Standard Font command 23-85
SELECT= status response 16-11
semicolon 17-9
separators (HP-GL/2 syntax) 17-7
serial I/O Glossary-13
serif style, font header 11-27
Set Compression Method command 15-16
Set Pattern Reference Point command
13-13, 13-22
Set Picture Frame Anchor Point command
18-10
Set Status Readback Location Type
command 16-8
Set Status Readback Location Unit
command 16-9
shaded fill 22-11
fonts 7-11
FT command 22-9
pattern selection 13-8, 14-5
patterns 13-9, 14-6, 14-9
Shift In (SI) 8-5, 23-8
Shift Out (SO) 8-5, 23-8, 23-66
short-edge binding mode 4-5
shortening commands 1-8
SI (Shift In) 8-5
SI command 23-8, 23-14, 23-74
example 23-75
signed byte (SB) 10-5, 11-14
character descriptor 11-51
signed integer (SI) 10-5, 11-14
signed long integer (SLI) 10-5, 11-14
SIMM
fonts 7-2
macro, storing 12-1
simplex printing 4-5
simplex/duplex print command 4-5
size
HP-GL/2 drawing 19-9
SL command 23-8, 23-78
example 23-79
slant, character 23-8, 23-78
SM command 22-35
SO (Shift Out) 8-5
soft font Glossary-13
soft fonts 7-2
creation 11-1
status readback 16-13
soft symbol sets 10-12
soft-clip window 17-19, 18-8, 18-10,
18-15, 19-18, 19-29, 19-35, 19-37,
20-20, 20-22
solid fill 22-9
source image 13-1, 13-2
source transparency mode 13-2
Source Transparency Mode command
13-6
SP command 22-5, 22-38
SP, Space 6-7
Space (SP) control code 6-7
Space character 5-20
spacing 7-4, Glossary-13
character 8-9, 24-4, 24-5
font header 11-20
font selection command 8-9, 8-23
HP-GL/2
23-70
special effects, fonts 7-11
specifications, page boundaries 2-7, 2-8
SR command 23-8, 23-14, 23-81
example 23-83
SS command 23-85
Standard Font Definition command 23-68
standard vs. alternate fonts, HP-GL/2
23-17
start angle 21-6
Start Raster Graphics command 15-14
status readback 16-1
bitmap fonts 16-12
clearing status 16-5
currently selected 16-3
DEFID= 16-15
Echo command 16-25
entity 16-3
entity request, example 16-4
entity response 16-11
error - entity 16-11
error - location type 16-8
error codes, entity 16-19
Error=INVALID ENTITY 16-19
Error=INVALID LOCATION 16-19