HP PCL/PJL reference (PCL 5 Printer Language) - Technical Reference Manual Part II

EN HP-GL/2 Plot Horizontal Size 18-11
HP-GL/2 Plot Horizontal Size
This command specifies the horizontal size of the HP-GL/2 drawing
being imported.
E
C
* c # K
# =The horizontal size in inches
Default = width of the currently selected picture frame
Range = 0 to 32767 (valid to 4 decimal places)
The horizontal HP-GL/2 plot size determines the horizontal scaling
factor used to fit the drawing into the PCL Picture Frame. For
example, if the horizontal HP-GL/2 plot size is specified as 12 inches
and the PCL Picture Frame width is 4 inches, the horizontal scaling
factor would be 3:1; the horizontal component of the image would be
reduced to one-third its original size to fit into the PCL Picture Frame.
A parameter value of zero or a reset, page length, paper size, or
orientation command defaults the HP-GL/2 plot size to the width of
the currently selected picture frame, resulting in no scaling.
Example:
If the original HP-GL/2 drawing is 8.5 inches wide, send:
E
C
*c8.5K