HP PCL/PJL reference (PCL 5 Printer Language) - Technical Reference Manual Part II

18-16 The Picture Frame EN
As the printer enters HP-GL/2 mode for the first time since
E
C
E,
power-on, or control panel reset, all HP-GL/2 variables are at
their default settings, as determined by the Picture Presentation
Directives (the PCL Picture Frame Size, Picture Frame Anchor
Point, and HP-GL/2 Plot Size commands).
Table 18-2 Example: Creating a Simple Drawing
E
C
E Reset the printer.
E
C
&&l2A Set the page size to letter.
E
C
&&l0O Specify portrait orientation.
E
C
*c3600x3600Y Specify a 5-inch wide by 5-inch high
PCL Picture Frame (5in. x 720
decipoints/in. = 3600 decipoints).
E
C
*p450x675Y Move the cursor to the point you
desire as the picture frame anchor
point.
E
C
*c0T Set the picture frame anchor point to
the cursor position.