HP PCL/PJL reference (PCL 5 Printer Language) - Technical Reference Manual Part II

EN Default Settings 18-17

%1B Enter HP-GL/2 mode with the cursor

(pen) at the PCL cursor position. In

this example, the cursor is at the

picture frame anchor point (450 dots

[1.5 in.] down from the top margin and

675 dots [2.25 in.] to the right of the

left logical page boundary).

IN;SP1; Initialize HP-GL/2 command values

and select pen number 1 (black). (The

IN command moves the pen position

from the anchor point to the HP-GL/2

origin, the lower-left corner of the PCL

Picture Frame.)

SC0,100,0,100; Set up user scaling so that P1 is (0,0)

and P2 is (100,100) (these points are

the lower-left and upper-right corners

of the PCL Picture Frame,

respectively).

PD100,0,100,

100,0,100,0,0;

Draw a box marking the perimeter of

the PCL Picture Frame.

Table 18-2 Example: Creating a Simple Drawing (continued)