HP PCL/PJL reference (PCL 5 Printer Language) - Technical Reference Manual Part II

EN Introduction 19-1
19
The Configuration
and Status Group
Introduction
The configuration and status group commands help you:
z Establish default conditions and values for HP-GL/2 features.
z Scale images in the dimensional units you want to use.
z Enlarge/reduce images for different media sizes.
z Establish a window (soft-clip limits).
z Draw equal-sized and mirror-imaged drawings.
z Rotate the HP-GL/2 coordinate system.
z Add comments to your HP-GL/2 command sequence.
Table 19-1 lists the commands described in this chapter.