HP PCL/PJL reference (PCL 5 Printer Language) - Technical Reference Manual Part II

19-2 The Configuration and Status Group EN
Table 19-1 The Configuration and Status Group Commands
Command Summary
CO, Comment Allows comments to be included in an
HP-GL/2 command sequence.
DF, Default Sets most programmable HP-GL/2
features to their default conditions.
IN,Initialize Sets all programmable HP-GL/2 features
to their default conditions.
IP, Input P1 and P2 Establishes new or default locations for
the scaling points P1 and P2.
IR, Input Relative P1
and P2
Establishes P1 and P2 locations as a
percentage of the PCL Picture Frame.
IW, Input Window Sets up a window (soft-clip limits).
PG, Advance Full Page This command is ignored.
1
1. These commands, useful in plotter applications, are not the optimal solution for
PCL 5 printers. Other PCL commands perform similar functions (see the Number
of Copies and Form Feed command descriptions).
RO, Rotate Coordinate
System
Rotates the HP-GL/2 coordinate system.
RP, Replot This command is ignored.
SC, Scale Establishes a user-unit coordinate
system.