HP PCL/PJL reference (PCL 5 Printer Language) - Technical Reference Manual Part II

EN IN, Initialize 19-21
In addition, the printer updates the Carriage Return point for labeling
to the current pen location. (See Chapter 23, The Character Group,
for more information on the Carriage Return point.)
The DF command does not affect the following HP-GL/2 conditions.
z Locations of P1 and P2.
z Current pen, its location, width, width unit selection, and up/down
z position.
z HP-GL/2 drawing rotation.
IN, Initialize
This command resets all programmable HP-GL/2 functions to their
default settings. Use the IN command to return the printer to a known
HP-GL/2 state and to cancel settings that may have been changed by
a previous command sequence. (The
E
C
E Reset issues an automatic
IN command.)
IN [;]
Notes In this manual, all command sequence examples begin with IN to
clear unwanted conditions from the previous command sequence,
even though an
E
C
E command automatically executes an IN
command.
Once HP-GL/2 mode is entered and commands are issued, the
HP-GL/2 conditions are no longer initialized. To place HP-GL/2
into the default state, send the IN command.
Transparency Mode TR1 Transparency mode on.
Transparent Data TD Normal printing mode.
User-Defined Line
Type
UL Defaults all 8 line types.
Table 19-8 Related commands
Related Commands Group
IN, Initialize The Configuration/Status Group
Table 19-7 Default Conditions (continued)