HP PCL/PJL reference - Printer Job Language Technical Reference Manual

EN PJL File System Commands 9-5
FSDIRLIST Command
The FSDIRLIST command returns a list of files and directories which
exist within the specified directory on the printer's file system. This
command is similar in function to the DOS DIR command. The
ENTRY and COUNT parameters are used to limit the amount of data
returned to the host.
Syntax:
@PJL FSDIRLIST NAME = "pathname"
~ENTRY=integer COUNT=integer[<CR>]<LF>
Response Syntax:
@PJL FSDIRLIST NAME = "pathname"
~ENTRY=integer[<CR>]<LF>
filename TYPE=FILE SIZE=integer<CR><LF>
filename TYPE=DIR<CR><LF>
...
<FF>
If the pathname is invalid:
@PJL FSDIRLIST NAME = "pathname"[<CR>]<LF>
FILEERROR=number<CR><LF>
<FF>
Parameters:
• NAME = "pathname" — for the FSDIRLIST command,
pathname must be a directory (not a file). For a complete
description of the NAME parameter, see the NAME =
"pathname" description on pages 9-2 and 9-3.
• ENTRY = integer — Every file or subdirectory that has been
created on the file system is considered an entry. The entry
variable is the number of the starting entry to be displayed. For
Parameter Functional Range Default
NAME="pathname" Roman-8 characters 01
thru 255
N/A
ENTRY=integer 1 to 2
31
– 1 N/A
COUNT=integer 1 to 2
31
– 1 N/A