HP PCL/PJL reference - Printer Job Language Technical Reference Manual

EN Product-Specific Feature Support A-49
Backward-Compatibility Mode
If the printer detects PCL data immediately after a job boundary, it
enters a backward-compatibility mode that responds like an HP
LaserJet III printer. This lasts until the next job boundary is detected.
For backward- compatibility mode to occur, the PERSONALITY
variable must be set to AUTO or PCL, and the job must contain only
PCL dataif any PJL commands are received during the job, the
printer does not enter backward-compatibility mode.
There are two differences between backward-compatibility mode and
normal operating mode. In backward-compatibility mode, when a PCL
printer language reset (<ESC>E) is executed, instead of causing the
PJL Current Environment variables to be loaded into the Modified
Print Environment, the User Default Environment settings (control
panel values) are loaded. This is the same way the LaserJet III printer
works.
Note Because HP LaserJet 4L, 5L, 6L, and 1100 series printers do not
support job boundaries (JOB/EOJ), they always load the PJL Current
Environment variables into the Modified Print Environment after
receiving an <ESC>E reset.
Also, when a backward-compatible job ends with a partial page (one
not terminated with a form feed or PCL printer language reset) and
the job times out, the job does not immediately end, printing the
partial page. Instead, the printer waits to see if the next job sent
consists of more PCL data (from the same I/O port), which it then
appends to the partial page already in the printer. (This works the
same way as the HP LaserJet III printer, which does not have a job
timeout.) If PJL data is received instead, the partial page is printed
before the new PJL job is executed.
Printers that support the backward-compatibility mode:
HP LaserJet 4, 4M, 4 Plus, 4M Plus, 4V, 4MV, 4Si, 4SiMx, 4L, 4ML,
4P, 4MP, 4PJ, 4LJ Pro, 4LC, 4000 series, 5, 5M, 5L, 5P, 5MP, 6L, 6P,
6MP, 5Si, 5SiMx, 5Si Mopier, HP Color LaserJet, HP Color LaserJet
5, 5M, 1100 series, 2100 series, 4500 series, 5000 series, 8000
series, 8100 series, 8500 series