HP Embedded Web Server - User Guide

ENWW Security 27
Enabling outgoing e-mail
It is only necessary to enable outgoing e-mail if you intend to use the Alerts or AutoSend feature.
Note After you enable outgoing e-mail, configure it by following the instructions in “Email” on page 18.
● Select the Enable Outgoing Email check box, and then click Apply to save the changes.
Enabling incoming e-mail
You should enable incoming e-mail if you intend to request information pages from the product
by using e-mail messages. For more information, see
“Sending e-mail commands to the product” on
page 23
.
Note After you enable incoming e-mail, configure it by following the instructions in “Email” on page 18.
● Select the Enable Incoming Email check box, and then click Apply to save the changes.