HP PCL/PJL reference - Printer Job Language Technical Reference Manual

5-10 Job Separation Commands EN
PJL Job Security
HP LaserJet 2100 series, 4000 series, 4500 series, 5000 series,
8000 series, 8100 series, 8500 series, 4/4M Plus, 4V, 4MV, 4Si,
4SiMx, 5, 5M, 5Si, 5SiMx, 5Si Mopier, 5P, 6P, and 6MP printers
support the following types of PJL security:
Password protection of default feature settingsthis type of
security prevents applications from modifying the printer's
default feature settings unless the correct password is
specified.
Control panel lockprevents users from modifying control
panel settings using the control panel keys.
Disk lock (LaserJet 4V, 4MV, 4000 series, 5000 series,
8000 series, 8100 series, 8500 series, 5, 5M, 5Si, 5SiMx,
5Si Mopier only)—prevents writing to the printer's disk
(or flash memory).
File system initialization—for printers with a PJL file system,
the FSINIT command will not initialize the file system unless
specified in a secure job.
All types of security are set using the DEFAULT command and
queried using DINQUIRE or INQUIRE.
Password Protection of Default Feature
Settings
You can use a password to protect the printer's default features by
sending the @PJL DEFAULT PASSWORD = number command,
specifying a number between 1 and 65,535 (the 0 value disables
password protection). Once password protection is enabled, the
DEFAULT or INITIALIZE commands are disabled unless the correct
password is specified in the JOB command. Printer languages, such
as PCL and PostScript, are also prevented from changing default
variables.
Secure PJL jobs are able to use the DEFAULT and INITIALIZE
commands (or printer language commands) to set default features,
including the value of the PASSWORD, CPLOCK, and DISKLOCK
variables, until the next EOJ command is received.