HP Color LaserJet CP6015 Series - User Guide

●
SRA3 (Trays 3, 4, or 5 only)
●
B5 (ISO)
●
RA4
●
SRA4
●
8K 270 x 390 mm
●
16K 195 x 270 mm
●
8K 260 x 368 mm
●
16K 184 x 260 mm
●
8K 273 x 394 mm
●
16K 197 x 273 mm
CAUTION: Do not print envelopes or unsupported sizes of paper from the 500-sheet trays. Print on
these types of paper only from Tray 1. Do not overfill the input tray or open it while it is in use. Doing so
can cause paper jams.
Load custom-size paper into Tray 2, 3, 4, or 5
To use custom media, change the size setting on the control panel to CUSTOM and set the unit of
measure, X dimension, and Y dimension. See
Configure a tray to match print job settings
on page 99 for more information.
1. Slide open the tray from the product.
2. Load the print media as described in steps 2 through 4 of the “Load detectable (standard-size)
media into Tray 2, 3, 4, or 5” section. Then proceed to step 3 in this procedure.
96 Chapter 7 Paper and print media ENWW