HP Color LaserJet CP6015 Series - User Guide

Figure 7-4 Booklet maker finisher dimensions
1104.9 mm (43.5 in)
635 mm
(25 in)
615 m m
(24.25 in)
406 mm
(16 in)
1626 mm
(64 in)
75 kg
165.3 lb
Configure the accessory operation mode
Select the operating mode at the control panel
You can set the operating mode for the 3-bin stapler/stacker or the booklet maker finisher at the product
control panel.
1. At the control panel, press Menu.
2. Press the down arrow
to highlight the CONFIGURE DEVICE menu, and then press the
checkmark button
.
3. Press the down arrow
to highlight the MBM-3 BIN STAPLER menu or MULTIFUNCT
FINISHER, and then press the checkmark button
.
4. Press the down arrow
to highlight OPERATION MODE, and then press the checkmark button
.
5. Select the operation mode that you want to use.
●
When Mailbox Mode is used, each bin is assigned to a user or group of users. Every time a
user sends a print job, the job is routed to the assigned bin.
●
When Stacker Mode is used and the optional 3-bin stapler/stacker is installed, the three bins
act as a single bin. When one bin is full, jobs are automatically routed to the next bin. When
Stacker Mode is used and the booklet maker finisher is installed, the two upper bins act as a
single bin, and the third bin is reserved for booklets.
NOTE: Use the product embedded Web server to assign output bins to users or groups of users.
For more information see
Embedded Web server on page 142
ENWW Choose an output location 105