HP Color LaserJet CP6015 Series - User Guide

Economy settings
You can adjust economy settings from the control panel or from the embedded Web server (EWS).
Sleep delay
The adjustable sleep mode feature reduces power consumption when the product has been inactive for
an extended period. You can set the length of time before the product enters sleep mode to
1 MINUTE, 15 MINUTES, 30 MINUTES, 45 MINUTES, 60 MINUTES, 90 MINUTES, 2 HOURS, or
4 HOURS. The default setting is 60 MINUTES.
NOTE: The product display dims when the product is in sleep mode. This mode does not affect product
warm-up time.
Set sleep delay
1. Press Menu.
2. Press the down arrow
to highlight CONFIGURE DEVICE, and then press the checkmark button
.
3. Press the down arrow
to highlight SYSTEM SETUP, and then press the checkmark button .
4. Press the down arrow
to highlight SLEEP DELAY, and then press the checkmark button .
5. Press the up or down arrow
/ to select the appropriate time period.
6. Press the checkmark button
to set the time period.
7. Press Menu.
Disable/enable sleep mode
1. Press Menu.
2. Press the down arrow
to highlight CONFIGURE DEVICE, and then press the checkmark button
.
3. Press the down arrow
to highlight RESETS, and then press the checkmark button .
4. Press the down arrow
to highlight SLEEP MODE, and then press the checkmark button .
5. Press the up arrow or down arrow
/ to select LOW, HIGH, or OFF. HIGH saves the most energy.
6. Press the checkmark button
to save the selection.
7. Press Menu.
Wake time
The wake time feature allows you to instruct the product to wake at a certain time on selected days, to
eliminate waiting for the warm-up and calibration periods. You must have SLEEP MODE on to set the
wake time.
To set or change the wake time, use the following steps:
108 Chapter 8 Use product features ENWW