HP Color LaserJet CP6015 Series - User Guide

Control panel message Description Recommended action
If the message persists, contact HP Support
at
www.hp.com/support/cljcp6015.
40 BAD EIO X TRANSMISSION The connection between the product and the
EIO card in the specified slot has been
broken.
Press the checkmark button to clear the
error message and continue printing.
Try to reinstall the EIO card.
40 BAD SERIAL TRANSMISSION
To continue press
(Checkmark
button)
A serial data error (parity, framing, or line
overrun) occurred as data was being sent by
the computer.
Press the checkmark button to clear the
error message. (Data will be lost.)
40 EMBEDDED I/O BAD TRANSMISSION
To continue press
(Checkmark
button)
A temporary printing error has occurred. Press the checkmark button to clear the
error message. (Data will be lost.)
41.3 UNEXPECTED SIZE IN TRAY <XX>
For help press
(Help button)
LOAD TRAY <XX> [TYPE} [SIZE]
To use another tray press
(Checkmark
button)
The product detected a different paper size
than expected.
Load the tray with the size and type of paper
indicated, or use another tray.
41.3 UNEXPECTED SIZE IN TRAY <XX>
For help press
(Help button)
LOAD TRAY <XX> [TYPE} [SIZE]
To use another tray press
(Checkmark
button)
The product detected a different paper size
than expected.
Following the instructions on the screen, load
the tray with the size and type of paper
indicated, or use another tray.
To use another tray press the checkmark
button
.
41.5 UNEXPECTED TYPE IN TRAY <XX>
For help press
(Help button)
LOAD TRAY <X> [TYPE] [SIZE]
For help press
(Help button)
The product detected a different paper type
than expected.
Load the tray with the size and type of paper
indicated, or use another tray.
To use another tray press the checkmark
button
.
41.5 UNEXPECTED TYPE IN TRAY <XX>
For help press
(Help button)
LOAD TRAY <X> [TYPE] [SIZE]
To use another tray press
(Checkmark
button)
The product detected a different paper type
than expected.
Load the tray with the size and type of paper
indicated, or use another tray if available.
41.7 ERROR
To continue, touch OK.
The paper was late arriving at the registration
area and almost caused a paper jam.
Press the Help button to see details.
To clear, press
(Checkmark button).
To exit, press
.
If the error does not clear, turn the product off
and turn it on.
If this error reappears, try using different
media.
Table 12-1 Control-panel messages (continued)
ENWW Control-panel messages 183