HP Color LaserJet CP6015 Series - User Guide

Control panel message Description Recommended action
To continue press (Checkmark
button).
functions might occur if an error occurred in
permanent storage.
If this message persists, contact an HP-
authorized service or support provider. (See
the HP Support flyer, or go to
www.hp.com/
support/cljcp6015.)
68.X STORAGE ERROR SETTINGS
CHANGED
One or more product settings are invalid and
have been reset to the factory-default
settings. Printing can continue, but some
unexpected functions might occur if an error
occurred in permanent storage.
Press the checkmark button to clear the
message. If the message is not cleared, turn
the product off, and then turn the product on.
If this message persists, contact an HP-
authorized service or support provider. (See
the HP Support flyer, or go to
www.hp.com/
support/cljcp6015.)
69.X ERROR To continue turn off then on A temporary printing error occurred. Turn the product off, and then turn the
product on.
If this message persists, contact an HP-
authorized service or support provider. (See
the HP Support flyer, or go to
www.hp.com/
support/cljcp6015.)
<Bin name> FULL
Remove all paper from bin
The specified output bin is full. Empty bin and continue printing. Output bins
include the standard top bin, and, if you have
an optional paper handling device, the upper
left bin, middle left bin, lower left bin, or lower
booklet bin
ACTION NOT CURRENTLY AVAILABLE
FOR TRAY X TRAY SIZE CANNOT BE ANY
SIZE/ANY CUSTOM
Canceling…
The user attempted to set the registration for
a tray that is set to ANY SIZE or ANY
CUSTOM. Duplex registration is not available
when the size is set to ANY SIZE or ANY
CUSTOM.
Configure the tray to a specific size, and then
set the registration for that tray.
BAD DUPLEXER CONNECTION The duplexer is not functioning correctly. Turn the product off then on. If this message
persists, contact an HP-authorized service or
support provider. See the HP support flyer, or
go to
www.hp.com/support/cljcp6015.
BAD OPTIONAL TRAY CONNECTION The optional tray is not connected. 1. Turn product off
2. Remove and then reinstall optional tray
or trays.
If error persists, contact an HP-authorized
service or support provider. See the
HP support flyer, or go to
www.hp.com/
support/cljcp6015
Calibrating... Displays during calibration. No action is necessary.
CALIBRATION RESET PENDING
For help press
(Help button)
PROCESSING…
A calibration reset will occur when all jobs are
processed.
To initiate the reset sooner, cancel all jobs by
pressing the STOP button.
CARD SLOT <X> NOT FUNCTIONAL
For help press
(Help button)
The compact flash card in slot <X> is not
working correctly.
Remove the card from the slot indicated, and
replace with a new card.
CARD SLOT DEVICE FAILURE
To clear press
(Checkmark button)
The specified device has failed. Press the checkmark button
to clear.
Table 12-1 Control-panel messages (continued)
186 Chapter 12 Solve problems ENWW