HP Color LaserJet CP6015 Series - User Guide

Control panel message Description Recommended action
If error persists, contact an HP-authorized
service or support provider. See the
HP support flyer, or go to
www.hp.com/
support/cljcp6015
Cooling Device... The product is adding additional pauses to
the print cycle in order to cool down.
The product has recently experienced a
period of heavy usage, so it has entered a
cooling cycle in order to maintain a supported
operating temperature. No action is
necessary.
CORRUPT FIRMWARE IN EXTERNAL
ACCESSORY
For help press
(Help button)
The product detected corrupt firmware in the
input or output accessory.
An external accessory of the product requires
a firmware upgrade. Printing can continue if
other inputs or outputs are available, but jams
may occur if the job uses the corrupt external
accessory. To view the upgrade procedure
and download the most recent firmware, go
to
www.hp.com/support/cljcp6015.
DATA RECEIVED
To print last page press
(Checkmark
button)
The product is waiting for the command to
print the last page.
Press the checkmark button to print the
last page.
DATE/TIME= YYYY/MMMM/DD HH:MM
To change press
(Checkmark button)
To skip press STOP
The current date and time set for the product. Press the checkmark button to set the
date and time or press the stop button to skip
setup.
Deleting private jobs The product is deleting a private stored job. No action is necessary.
Deleting... The product is currently deleting the stored
job.
No action is necessary.
Device shutting down... Device is shutting down. No action is necessary.
EIO <X> disk initializing The specified EIO disk device is initializing. No action is necessary.
EIO <X> disk is spinning up EIO disk device in slot <X> is spinning up its
platter. Jobs that require disk access must
wait.
No action is necessary.
EIO <X> DISK NOT FUNCTIONAL
For help press
(Help button)
The EIO disk in slot <X> is not working
correctly.
1. Turn product off.
2. Remove disk from the slot indicated.
3. Replace with new disk.
4. Turn product on.
EIO DEVICE FAILURE
To clear press
(Checkmark button)
The specified device has failed. Press the checkmark button to clear.
EIO FILE OPERATION FAILED
To clear press
(Checkmark button)
A PJL file system command attempted to
perform an illogical operation.
Press the checkmark button to clear.
EIO FILE SYSTEM IS FULL
To clear press
(Checkmark button)
A PJL file system command could not store
something on the file system because the file
system was full.
Press the checkmark button to clear.
EIO IS WRITE PROTECTED
To clear press
(Checkmark button)
The file system device is protected and no
new files can be written to it.
Press the checkmark button
to clear.
Table 12-1 Control-panel messages (continued)
188 Chapter 12 Solve problems ENWW