HP Color LaserJet CP6015 Series - User Guide

Control panel message Description Recommended action
EXTERNAL DEVICE INITIALIZING The external paper handling device is
initializing.
No action is necessary.
FINISHING PROCESS NOT FUNCTIONAL
For help press
(Help button)
A finishing process has failed. Press the help button for help.
INCOMPATIBLE FUSER The incorrect fuser was installed. CAUTION: The fuser can be hot while the
product is in use. Wait for the fuser to cool
before handling it.
1. Open right door.
2. Turn blue levers to unlock position.
3. Remove incompatible fuser.
4. Install correct fuser.
5. Turn blue levers to lock position.
6. Close the right door.
INCOMPATIBLE ROLLER KIT Installed roller kit is incompatible. 1. Open right door.
2. Remove incompatible roller kit.
3. Install correct roller kit.
4. Close the right door.
Initializing permanent storage Displayed when the product is turned on to
show that permanent storage is being
initialized.
No action is necessary.
INPUT PAPER PATH OPEN
For help press
(Help button)
The paper path between the product and the
external paper handling input device is open
and must be closed before printing can
continue.
Close the paper path.
INSTALL <COLOR> CARTRIDGE
For help press
(Help button)
The print cartridge has been removed or has
been installed incorrectly.
Replace or reinstall the print cartridge
correctly to continue printing. See
Change
print cartridges on page 152.
INSTALL <COLOR> DRUM
For help press
(Help button)
One or more of the <color> drums have been
removed or installed incorrectly.
Replace or reinstall the image drum correctly
to continue printing. See
Change image
drums on page 154.
INSTALL FUSER
For help press
(Help button)
The fuser has been removed or installed
incorrectly.
CAUTION: The fuser can be hot while the
product is in use. Wait for the fuser to cool
before handling it.
1. Open right door.
2. Turn blue levers to unlock position.
3. Install or adjust fuser.
4. Turn blue levers to lock position.
5. Close the right door.
INSTALL ROLLER UNIT
For help press
(Help button)
The roller unit has been removed or installed
incorrectly.
1. Open right door.
2. Open transfer access panel.
Table 12-1 Control-panel messages (continued)
ENWW Control-panel messages 189