HP Color LaserJet CP6015 Series - User Guide

Control panel message Description Recommended action
ORDER STAPLE CARTRIDGE
To continue press
(Checkmark
button)
The staple cartridge has reached the low
threshold. Printing and stapling will continue
until the staples need to be replaced.
Order a staple cartridge. Press the
checkmark button
to continue printing.
ORDER SUPPLIES More than one supply needs to be replaced
or is nearing the end of its useful life.
Order the necessary supplies.
ORDER TRANSFER KIT The transfer kit is near end of life. Printing can
continue.
Order a replacement transfer kit.
ORDER TRANSFER KIT LESS THAN XXX
PAGES
For help press
(Help button)
The transfer unit is near end of life. The
product is ready and will continue printing for
the estimated number of pages.
Pages remaining for this supply have
reached the low threshold. Printing will
continue until a supply needs to be replaced.
OUTPUT ACCESSORY BRIDGE
ATTACHED
To continue turn power off then on
The output accessory bridge was attached
while the product was on. Printing cannot
continue.
1. Turn the product off.
2. Attach the output device.
3. Turn the product on.
OUTPUT ACCESSORY BRIDGE
DISCONNECTED
For help press
(Help button)
The output accessory bridge was removed
while the product was on. Printing cannot
continue.
1. Turn power off.
2. Verify output accessory bridge and
output device is connected correctly.
3. Turn power on.
To continue without the output accessory
bridge, turn power off, attach a standard
output tray, and then turn power on.
If the message persists, contact HP Support
at
www.hp.com/support/cljcp6015.
OUTPUT ACCESSORY BRIDGE FAILURE
For help press
(Help button)
The output accessory bridge has failed. 1. Turn power off.
2. Verify output accessory bridge is
connected correctly.
3. Turn power on.
If the message persists, contact HP Support
at
www.hp.com/support/cljcp6015
Password or name is incorrect. Please
enter correct login.
The user name or password was typed
incorrectly.
Retype the user name and password.
Paused
To return to ready press STOP
The product is paused, and there are no error
messages pending at the display. The I/O
continues receiving data until memory is full.
Press the Stop key.
Performing COLOR BAND TEST The color-band test is being performed. No action is necessary.
Performing... PAPER PATH TEST The product is performing a paper path test. No action is necessary.
Please wait The product is in the process of clearing data. No action is necessary.
PRINTING <REPORT> The product is generating the specified
report. The product will return to the online
Ready state when the page is completed.
No action is necessary.
PRINTING STOPPED Time has expired on the Print/Stop test. Press the checkmark button to continue.
Table 12-1 Control-panel messages (continued)
ENWW Control-panel messages 193