HP Color LaserJet CP6015 Series - User Guide

Control panel message Description Recommended action
image drum of the same color are not
removed.
To exit press the Stop button.
REPLACE <COLOR> CARTRIDGE The identified print cartridge has reached the
end of life. Printing can continue.
Replace the specified color cartridge.
Change print cartridges on page 152
REPLACE <COLOR> DRUM
For help press
(Help button)
The specified color drum has reached the end
of life.
Replace image drum.
1. Open the front door.
2. Replace the specified image drum.
3. Close the front door.
REPLACE <COLOR> DRUM
To continue press
(Checkmark
button).
The REPLACE SUPPLIES menu is set to
STOP AT LOW. The specified image drum
has passed the low threshold.
Replace image drum or press the checkmark
button
to continue until the image drum is
at the end of life.
1. Open the front door.
2. Replace the specified image drum.
3. Close the front door.
REPLACE FUSER KIT The fuser is nearing the end of its useful life.
Printing can continue.
CAUTION: The fuser can be hot while the
product is in use. Wait for the fuser to cool
before handling it.
1. Open the right door.
2. Turn blue levers to unlock position.
3. Install new fuser.
4. Remove the old fuser unit from the
product.
5. Turn blue levers to lock position.
6. Close the right door.
REPLACE FUSER KIT
For help press
(Help button)
To continue press
(Checkmark
button).
The REPLACE SUPPLIES menu is set to
STOP AT LOW. The fuser kit has reached the
low threshold.
CAUTION: The fuser can be hot while the
product is in use. Wait for the fuser to cool
before handling it.
Press the checkmark button
to continue
printing until the fuser reached the end of life
or replaced fuser.
Replaced fuser
1. Open the right door.
2. Turn blue levers to unlock position.
3. Install new fuser.
4. Turn blue levers to lock position.
5. Close the right door.
REPLACE ROLLER KIT
For help press
(Help button)
Pages remaining for roller kit has reached
the low threshold.
To continue printing without replacing the
roller kit, press the checkmark button
.
Table 12-1 Control-panel messages (continued)
ENWW Control-panel messages 195