HP Color LaserJet CP6015 Series - User Guide

Print Quality menu
To display: Press Menu, select CONFIGURE DEVICE, and then select PRINT QUALITY.
Item Sub-item Values Description
ADJUST COLOR HIGHLIGHTS
●
CYAN DENSITY
●
MAGNETA DENSITY
●
YELLOW DENSITY
●
BLACK DENSITY
Range from +5 to –5.
Default is 0.
Adjust the darkness or lightness of highlights on a
printed page. Lower values represent lighter
highlights on a printed page, and higher values
represent darker highlights on a printed page.
MIDTONES
●
CYAN DENSITY
●
MAGNETA DENSITY
●
YELLOW DENSITY
●
BLACK DENSITY
Range from +5 to –5.
Default is 0.
Adjust the darkness or lightness of midtones on a
printed page. Lower values represent lighter
midtones on a printed page, and higher values
represent darker midtones on a printed page.
SHADOWS
●
CYAN DENSITY
●
MAGNETA DENSITY
●
YELLOW DENSITY
●
BLACK DENSITY
Range from +5 to –5.
Default is 0.
Adjust the darkness or lightness of shadows on a
printed page. Lower values represent lighter
shadows on a printed page, and higher values
represent darker shadows on a printed page.
RESTORE COLOR VALUES Restore the color settings by resetting the density
values of each color.
SET REGISTRATION Setting the registration shifts the margin alignment
to center the image on the page from top to bottom
and from left to right. You can also align the image
on the front with the image printed on the back.
PRINT TEST PAGE Print a test page for setting the registration.
SOURCE ALL TRAYS
TRAY 1
TRAY 2
TRAY <X> (X = 3, 4, or
5)
Select the source input tray for printing the SET
REGISTRATION test page.
ADJUST TRAY <X>
●
X1 SHIFT
●
X2 SHIFT
●
Y SHIFT
Shift from -20 to 20
along the X or Y axes.
0 is the default.
Perform the alignment procedure for each tray.
When it creates an image, the product scans
across the page from side to side as the sheet
feeds from top to bottom into the product.
The scan direction is referred to as X. X1 is the
scan direction for the first side of a 2-sided page.
X2 is the scan direction for the second side of a 2-
sided page. The feed direction is referred to as Y.
22 Chapter 2 Control panel ENWW