HP Color LaserJet CP6015 Series - User Guide

Item Sub-item Values Description
●
NORMAL is the default trapping setting.
Trapping is at a medium level and adaptive
halftoning is on.
●
MAXIMUM is the most aggressive trapping
setting. Adaptive halftoning is on.
PROCESS CLEANING
PAGE
Allows you to create and process a cleaning page
for cleaning excess toner off the pressure roller in
the fuser. When the cleaning process runs, a blank
page is printed. This page can be discarded.
System setup menu
Use the SYSTEM SETUP menu to change product- configuration defaults such as sleep mode, product
personality (language), and jam recovery.
To display: Press Menu, select CONFIGURE DEVICE, and then select SYSTEM SETUP.
Item Sub-item Values Description
DATE/TIME DATE ----/[MMM]/[YY] YEAR=
[YYYY]/---/[DD] MONTH=
[YYYY]/[MMM]/-- DAY=
Allows you to set the correct date.
DATE FORMAT YYYY/MMM/DD
MMM/DD/YYYY
DD/MMM/YYYY
Allows you to choose the order in
which the year, month, and day
appear in the date.
TIME --:[MM] [PM] HOUR=
[HH]:-- [PM] MINUTE=
[HH]:[MM] -- AM/PM=
Allows you to select from various
configurations for the TIME format.
Different wizards appear
depending on the TIME FORMAT
selected.
TIME FORMAT 12 HOUR
24 HOUR
Allows you to select 12 HOUR or
24 HOUR format.
JOB STORAGE LIMIT Continuous value
Range: 1–100
Default = 32
Allows you to specify the number
of Quick Copy jobs that can be
stored on the product. The default
value is 32. The maximum allowed
value is 100.
JOB HELD TIMEOUT OFF
4 HOURS
1 DAY
1 WEEK
Allows you to set the amount of
time that Quick Copy jobs are kept
before being automatically deleted
from the queue. This menu item
only appears when a hard disk is
installed. The default value is
OFF.
SHOW ADDRESS AUTO
OFF
This item determines whether the
product’s IP address is shown on
the display with the READY
message. The default is OFF.
ENWW Configure device menu 27