HP Color LaserJet CP6015 Series - User Guide

Item Sub-item Values Description
printing with black toner only. The
default is STOP.
JAM RECOVERY AUTO
OFF
ON
Sets whether the product will
attempt to reprint pages after a
jam. The default is AUTO.
LANGUAGE A listing of available languages
appears.
Sets the default language. The
default language is ENGLISH.
Output Setup menu
This menu and associated sub-items displays only when an optional output accessory is attached to
the product.
To display: Press Menu, select CONFIGURE DEVICE, and then select OUTPUT SETUP.
Item Sub-item Values Description
OUTPUT SETUP This menu appears when the
HP 3-bin Stapler/Stacker
Accessory or the HP Booklet
Maker/Finisher Accessory is
attached.
MULTIFUNC FINISHER
or
MBM-3 BIN STAPLER
OPERATION MODE MAILBOX
STACKER
Allows you to set the default
operation mode. MAILBOX
assigns a user or group of users
to each output bin. STACKER
treats all of the output bins as a
single large bin. When one bin
gets full, jobs are automatically
routed to the next bin.
STAPLES NONE
ONE LEFT ANGLED
ONE RIGHT ANGLED
TWO LEFT
TWO RIGHT
TWO TOP
Sets the default staple selection
for documents sent to the device
when no staple value is specified.
STAPLES OUT STOP
CONTINUE
Sets the default behavior when a
job specifies stapling and the
stapler is out of staples. STOP
stops printing if the stapler runs
out of staples. CONTINUE allows
a job to continue printing even
when the device is out of staples.
OFFSET OFF
ON
Turns the job offset feature on or
off. When job offset is on, each
copy of a job is shifted to one side
in the output bin in order to keep
ENWW Configure device menu 33