HP Color LaserJet CP6015 Series - User Guide

Item Sub-item Values Description
SECURITY PRINT SEC PAGE YES
NO
YES: Prints a page that contains the current security
settings on the HP Jetdirect print server.
NO*: A security settings page is not printed.
SECURE WEB HTTPS REQUIRED
HTTP/HTTPS
OPTIONAL
For configuration management, specify whether the
embedded Web server will accept communications
using HTTPS (Secure HTTP) only, or both HTTP and
HTTPS.
HTTPS REQUIRED: For secure, encrypted
communications, only HTTPS access is accepted. The
print server will appear as a secure site.
HTTP/HTTPS OPTIONAL: Access using either HTTP
or HTTPS is permitted.
IPSEC KEEP
DISABLE
Specify the IPsec or Firewall status on the print server.
KEEP: IPsec/Firewall status remains the same as
currently configured.
DISABLE: IPsec/Firewall operation on the print server
is disabled.
RESET SECURITY NO
YES
Specify whether the current security settings on the
print server will be saved or reset to factory defaults.
NO*: The current security settings are maintained.
YES: Security settings are reset to factory defaults.
DIAGNOSTICS EMBEDDED TESTS EXECUTE This menu provides tests to help diagnose network
hardware or TCP/IP network connection problems.
Embedded tests help to identify whether a network fault
is internal or external to the product. Use an embedded
test to check hardware and communication paths on
the print server. After you select and enable a test and
set the execution time, you must select EXECUTE to
initiate the test.
Depending on the execution time, a selected test runs
continuously until either the product is turned off, or an
error occurs and a diagnostic page is printed.
LAN HW TEST CAUTION: Running this embedded test will erase
your TCP/IP configuration.
This test performs an internal loopback test. An internal
loopback test will send and receive packets only on the
internal network hardware. There are no external
transmissions on your network.
Select YES to choose this test, or NO to not choose it.
HTTP TEST This test checks operation of HTTP by retrieving
predefined pages from the product, and tests the
embedded Web server.
Select YES to choose this test, or NO to not choose it.
SNMP TEST This test checks operation of SNMP communications
by accessing predefined SNMP objects on the product.
Table 2-1 Embedded Jetdirect and EIO <X> Jetdirect menus (continued)
ENWW Configure device menu 39