HP Color LaserJet CP6015 Series - User Guide

Item Sub-item Values Description
COPIES Range is 1 to 30. The default value
is 1.
Allows the user to determine how
many copies of the internal page
are printed.
FINISHER TESTS If the optional stapler/stacker or
booklet maker is installed, this
menu runs tests on specific
sensors and components. Different
values are displayed, based on the
accessory installed.
MANUAL SENSOR TEST READ ALL ONCE
CONTINUOUS READING
Initiates a diagnostic test of the
sensors on the stapler/stacker or
booklet maker.
COMPONENT TESTS M1 - DELIVER MOTOR (booklet
maker only)
M2 - FOLDING MOTOR (booklet
maker only)
M3 - GUIDE MOTOR (booklet
maker only)
M4 - GUIDE PLATE MOTOR
(booklet maker only)
M9 - INLET MOTOR (booklet
maker only)
M31 - ENTRANCE MOTOR
M36 - SWING MOTOR
M37 - TRAY 1 MOTOR
M38 - TRAY 2 MOTOR
M39 - PROCESS MOTOR
SL1 - FLAPPER 1 SOLENOID
(booklet maker only)
SL2 - FLAPPER 2 SOLENOID
(booklet maker only)
SL4 - BOOKLET SOLENOID
(booklet maker only)
SL5 - SWITCH SOLENOID
(booklet maker only)
SL31 - ROLLER 1A SOLENOID
SL32 - BUFFER SOLENOID
SL33 - OUTPUT SOLENOID
SL34 - GUIDE SOLENOID
Activates a diagnostic test for the
selected motor or solenoid.
46 Chapter 2 Control panel ENWW