HP EVAInfo Release Notes (T5494-96496, June 2012)

• HP recommends that you use the HP EVAInfo binary evainfo_HPUX_11.11_PARISC for

hosts running HP-UX 11.23 PA-RISC and HP-UX 11.23 IA 64.

• HP EVAInfo ignores invalid parameters entered with options –a ,–W, –p, and –P .

Commands

Table 2 (page 6) provides examples of commands executed from an HP-UX 11.23 system.

Table 2 HP-UX command examples

Command example:To obtain:

# ./evainfo-hpux_v11.23 -hUsage information

# ./evainfo-hpux_v11.23 -vVersion

# ./evainfo-hpux_v11.23 -aA list of all LUNs

# ./evainfo-hpux_v11.23 -a –lA list of all LUNs in long format

# ./evainfo-hpux_v11.23 -a –f csvA list of all LUNs in CSV format

# ./evainfo-hpux_v11.23 -WA list of all LUNs based on LUN WWN

# ./evainfo-hpux_v11.23 -w

6005-08B4-0010-470B-0001-1000-0457-0000

A list for a specific LUN

Table 3 (page 6) provides examples of commands executed from a Red Hat Enterprise Linux AS

4.0 IA64 system.

Table 3 Linux command examples

Command example:To obtain:

# ./evainfo-linux_rhel4_ia64 -aA list of all LUNs

# ./evainfo-linux_rhel4_ia64 -a –lA list of all LUNs in long format

# ./evainfo-linux_rhel4_ia64 -a –gA list of all LUNs based on SG devices

# ./evainfo-linux_rhel4_ia64 -a –l –gA list of all LUNs based on SG devices in long format

Sample output

Version example

# ./evainfo -v

P6000Info v10.1_120330

Agile device special file and its persistent device special file display

# ./evainfo_hpux_11.31_PARISC -a -p

Devicefile Array WWNN

Capacity Controller/Port/Mode

/dev/rdisk/disk5165 5000-1FE1-5002-E1B0 6005-08B4-0010-2AB1-0000-F000-0053-0000

10240MB Ctl-B/FP-2/NonOptimized

/dev/rdsk/c232t15d7 5000-1FE1-5002-E1B0 6005-08B4-0010-2AB1-0000-F000-0053-0000

10240MB Ctl-A/FP-1/Optimized

/dev/rdsk/c233t15d7 5000-1FE1-5002-E1B0 6005-08B4-0010-2AB1-0000-F000-0053-0000

10240MB Ctl-B/FP-2/NonOptimized

/dev/rdsk/c230t15d7 5000-1FE1-5002-E1B0 6005-08B4-0010-2AB1-0000-F000-0053-0000

10240MB Ctl-A/FP-1/Optimized