HP StorageWorks EVA4400 iSCSI Connectivity Option (mpx100b) 5.0 (5697-0512, June 2010)

• Apple Mac OS X (Power Mac G5, Xserve, Mac Pro)

• Linux–Red Hat (32/64-bit, IA64)

• Linux–SUSE (x86 32/64-bit, IA64)

• Microsoft Windows

• Sun Solaris

• VMware ESX

For the latest product support information, see SPOCK on the HP website:

http://www.hp.com/storage/spock

You must sign up for an HP Passport to access the website.

Prerequisites

The following are prerequisites for installing the EVA4400 iSCSI Connectivity Option (mpx100b):

• EVA4400

• HP StorageWorks Command View EVA

Installation instructions

For information about installing these products, see the HP StorageWorks EVA iSCSI connectivity

quick start instructions for Windows and the HP StorageWorks EVA iSCSI connectivity user guide,

available on the HP website: http://h18006.www1.hp.com/products/storageworks/evaiscsiconnect/

index.html.

Important information

This section contains important notes and workarounds for installation and use.

Using MPIO with Windows 2003

For Windows 2003 with raw disk device access, when using Microsoft Initiator version 2.07, MPIO

load balance policy must be set to Failover Only. For file system disk access or when using Microsoft

Initiator version 2.08, all MPIO load balance policies are supported.

ECC error fix console message

An ECC error fix message similar to the following may be displayed on the mpx100b console.

The ECC management software displays this message when it performs a NAND flash memory check

or correction.

ecc error fix performed on chunk 46349:0

Workaround

This message indicates that an error correction has occurred. No user action is required.