HP StoreEver Command View for Tape Libraries (CVTL) v. 3.7 and Interface Manager Firmware v I274 Release Notes

Version:
Command View for Tape Libraries version 3.7.00, and Interface Manager firmware version I274
Description
This document describes enhancements and fixes for HP Command View for Tape Libraries 3.7.00
and Interface Manager firmware version I274. HP SMI-S Tape Provider runs in the background on
Command View for Tape Libraries.
Update recommendation
Optional.
Supersedes
Command View for Tape Libraries versions 3.6.00 and 3.6.01
Product models
• Supports all models of HP ESL E-Series Tape Library.
• Supports all models of HP ESL G3 Tape Library.
• Supports all models of HP EML E-Series Tape Library.
• Supports HP 1/8 G2 Tape Autoloaders.
• Supports HP MSL2024, MSL4048, MSL6480, and MSL8096 Tape Libraries.
• Includes TapeAssure for selected tape drives in HP MSL G3 Tape Libraries, 1/8 G2 Tape
Autoloaders, and some standalone LTO Ultrium tape drive models. For more information, see
http://www.hp.com/go/tapeassure.
Operating systems
NOTE: Command View TL software is only fully compatible with English-language versions of
Windows.
SupportedOperating System
YesMicrosoft Windows Server 2003 SP2 (32/64 bit)
YesMicrosoft Windows Server 2008 SP1(32/64 bit)
YesMicrosoft Windows Server 2008 R2 (64 bit)
YesMicrosoft Windows Server 2012 (64 bit)
NOTE: On the above listed Microsoft Windows Operating Systems (64–bit), Command View TL will
run as a 32–bit application.
Management station (server) requirements
Minimum system
For environments with fewer than 10 tape libraries, Command View TL requires a management station
(server) with a minimum of:
• 1.6-GHz CPU, 2 GB RAM
• 2 GB of free disk space for installation
• 10/100 Base-T network card (static IP address recommended)
2 Description