HP StoreEver Command View for Tape Libraries (CVTL) v. 3.7 and Interface Manager Firmware v I274 Release Notes

• 443 (TCP) inbound, HTTPS Secure Webserver
• 636 (TCP) outbound, LDAPS Secure LDAP Client Outbound
• 1099…1108 (TCP) bidirectional, Java GUI RMI Connections
• 5696 (TCP) outbound, KMIP communication port on the server. Library uses a non privileged port.
• 5988 (TCP) inbound, SMIS/OpenWBEM
• 5989 (TCP) inbound, Secure SMIS/OpenWbem-9000
In addition, if you are encrypting your LTO4 tapes using the HP Secure Key Manager (SKM), see the
additional section on SKM firewall considerations.
Please refer to the documentation for your particular firewall software for instructions on how to
configure this access.
Found in version: 2.00 and above
Firmware Download, Support Ticket, and Move Media operations do not show progress
- Command View for Tape Libraries appears unresponsive
Symptom: Operations that show a progress bar in Command View for Tape Libraries (Firmware
Download, Support Tickets, Move Media, etc.) do not show any updates in progress while the operation
is being performed. Command View for Tape Libraries appears unresponsive and the browser must
be halted by the Windows task manager.
Cause: Windows XP, Service Pack 2, includes a firewall that generally blocks access to network ports
that the management station needs to communicate with the Interface Manager. Please configure your
firewall to open access to port 8098 (TCP), 8099 (TCP), and 18098 (TCP SSL) on your management
station. Running the Connectivity Check from the Command View for Tape Libraries Launcher will
verify that the management station can communicate with the Interface Manager.
Workaround: In order to allow remote access to your management station from behind a firewall other
ports may need to be opened as well. Please read the 'Command View for Tape Libraries access
through a firewall' section for more details.
Found in version: 2.0 (and above) and 1.82
Saving a configuration file from Command View for Tape Libraries fails
Symptom: An error message appears in the Command View TL user interface when trying to save a
configuration file.
Workaround: Retry the save operation with a different file name.
Found in version: 2.60
Drive Status in Command View for Tape Libraries "invalid or missing key generation
policy" after partitioning
Symptom: The Health Summary for encryption has the status for all drives listed as invalid or
missing key generation policy after partitioning
Workaround: Make sure the policies on the SKM match the Interface Manager’s configuration, then
reboot the Interface Manager
Found in version: 2.40
DNS resolver file populated incorrectly
Symptom: Interface Manager command line interface slow to respond to telnet and FTP.
Workaround: Make sure the DNS addresses in the DNS resolver file are correct and can be reached
from the Interface Manager board.
Found in version: All versions
32 Workarounds