HP StoreEver Command View for Tape Libraries (CVTL) v. 3.7 and Interface Manager Firmware v I274 Release Notes

HP SMI-S Tape Provider
See the HP StoreEver SMI-S Tape Provider Release Notes at http://www.hp.com/support/cvtl.
Installation instructions
If upgrading your Interface Manager from an I231 or lower release, ensure that the FTP server on the
Interface Manager is clear of all extra files.
CAUTION: Failure to clear these files may result in damage to the library and the need for service
intervention.
1. If you have a firewall that prevents FTP access, disable the firewall.
2. Use FTP to connect to the Interface Manager:
1. Open a command shell on any PC connected to the LAN.
2. Enter the command ftp ipaddress, where ipaddress is the IP address of the Interface
Manager card.
3. Log in with the user name ftp and no password.
3. Run del <filename> for each file to delete.
CAUTION: HP recommends that an HP Service engineer perform any upgrade of your Interface
Manager from an I2XX or lower release. The HP Service engineer will upgrade to version I232 using
CVTL 2.3.20 and the corresponding firmware bundle using the ESL c01464098 or EML c01463974
engineering document using CVTL 2.3.20. After the library is an I232 and the corresponding bundles,
Command View TL can be updated to 2.8.00. The library can then be downloaded to I274. I232
and I240 cannot be upgraded with Command View TL 3.0.00 and above.
Installation instructions 7