HP Interface Manager and Command View for Tape Libraries 3.7 User Guide

Figure 1 Network configuration for ESL E-Series tape libraries
2. Robot1. SDLT, LTO1, LTO2, or LTO3 tape drives
4. Interface Manager card3. FC interface controllers
6. External network5. Internal network
8. Remote web browser connected to management station
via HTTP
7. Management station with Command View TL
10. Library Cabinet Controller9. Telnet connection
12. Library boundary11. Serial CLI via RS-232 connection
14. Internal network switch (LTO4 or later libraries only)13. LTO4 or later tape drives
12 Introduction