HP Interface Manager and Command View for Tape Libraries 3.7 User Guide

7. Read the information on the screen, and click Next. Page 1 of the wizard appears.
By default this will un-enroll the enroll key manager and set it to backup software.
8. Read the text in the Reboot Warning, then click Next.
9. Verify the information, then click Next.
When you have completed the wizard, the key manager will be un-enrolled and Backup
Software is selected as Key Manager and appears in the right panel of the Key Management
window.
Changing the login on an SKM or ESKM
Use this procedure to change the user name and password that the library uses to log into the SKM
or ESKM.
IMPORTANT: You must also change the user name and password for the library in the SKM or
ESKM Management Console software.
1. You must log into Command View TL as a security user to change the key manager. See
“Starting Command View TL” (page 21).
2. In the Launcher window, click the Devices tab. A list of your current libraries appears.
3. Double-click the library for which you want to change the key manager.
4. Click the Configuration tab.
5. In the left panel, select Key Management.
NOTE: The Key Management command will only appear if you have Advanced Secure
Manager (see Using license keys (page 144)) and LTO4 and later tape drives installed in your
library (in the Library window, click the Status tab, then in the left panel, click Advanced LTO
Drives).
6. Select Actions→Update Key Manager Configuration. The welcome screen appears.
164 Advanced features in the GUI