HP Interface Manager and Command View for Tape Libraries 3.7 User Guide

Firmware files can be retrieved from the Internet using HP StoreEver L&TT.
Before using this command, a firmware file must have been transferred to the
Interface Manager card firmware repository via FTP/SFTP. See Updating the
firmware with the CLI (page 186) for more information.
CAUTION: Downloading firmware forces a reboot of the Interface Manager
card. Ensure that no backup jobs are in progress before running this command.
Syntax download mgmt
Availability All users and mode
Operands None
Examples To download firmware to the Interface Manager card:
Welcome to the Interface Manager Command Line Interface.
Type 'help' at the prompt for context-sensitive help.
/>download mgmt
You may enter 'q' at any time to quit.
Download code to INTRFC-MGR01 interface manager? Enter 'y' or 'n' (default: n):y
1. /im/xfer/imax_fw_I200.frm
Enter the number of the firmware file to use: 1
Task: Waiting...
Task % Complete: 10
Device % Complete Errors Status
---------- ---------- ------ --------------------
IM 10 none Checking firmware integrity.
Task: Waiting...
Task % Complete: 20
Device % Complete Errors Status
---------- ---------- ------ --------------------
IM 20 none Rebooting Interface Manager
The Interface Manager is rebooting. The CLI is closing.
See also download drive
download interface
download library
map host
Description Provides a host with access to all of the current drives.
CAUTION: Using this command could force a reboot of some interfaces.
Ensure that no backup jobs are in progress before running this command.
Syntax map host host_num[force]
Availability All users and mode
Operands Specify the host number. This operand is required.host_num
[force] An optional parameter; when force is specified, there will be
no prompt asking if you really want to map the host.
Examples To give host 1 access to all drives:
/>map host 1
Caution: Mapping hosts could force a reboot of some interfaces
and will terminate all backup operations involving the rebooting
interfaces.
Do you really want to map the host? y
Committing configuration done
See also unmap host
set host name
show host name
map host 195