HP Interface Manager and Command View for Tape Libraries 3.7 User Guide

reboot library
Description Reboots the library. After executing this command, the CLI session is lost and
must be reestablished.
CAUTION: To avoid loss of data, ensure that all backup jobs have completed
before executing this command.
Syntax reboot library [force]
Availability All users and manual mode only
Operands Specify force to skip the prompt asking if you are sure you want
to reboot the Interface Manager card. This operand is optional.
[force]
Examples To reboot the library:
/>reboot library
To reboot the library, skipping the reboot prompt:
/>reboot library force
Rebooting the Interface Manager
See also reboot interface
reboot mgmt
reboot mgmt
Description Reboots the Interface Manager card. After entering this command, you are
prompted to input whether you are sure you want to reboot the Interface
Manager card.
CAUTION: To avoid loss of data, ensure that all backup jobs have completed
before executing this command.
Syntax reboot mgmt [force]
Availability All users and manual mode only
Operands Specify force to skip the prompt asking if you are sure you want
to reboot the Interface Manager card. This operand is optional.
[force]
Examples To reboot the Interface Manager card:
/>reboot mgmt
Caution: Rebooting the Interface Manager could take up to XX
seconds, and you will have to log on again to use the CLI.
Do you really want to reboot the Interface Manager (y/n)? y
Rebooting the Interface Manager
To reboot the Interface Manager card, skipping the reboot prompt:
/>reboot mgmt force
Rebooting the Interface Manager
See also reboot interface
reboot library
remove host
Description Step-by-step wizard that guides you through the removal of a host node. The
wizard displays the hosts that are available for removal from the Interface
Manager. Only hosts that are not mapped appear.
Syntax remove host
Availability All users and modes
Operands None
reboot library 197