HP Interface Manager and Command View for Tape Libraries 3.7 User Guide

Operands Specify the tape drive for which to display interface
information. The interface information may be displayed for
drive_num
all tape drives by specifying all for this operand. This
operand is required.
Examples To show interface information for drive 1:
/>show drive interface 1
Tape drive interface information:
Drive Number Interface Name FC LUN Bus
---------------- ---------------- ------ ---
Drive 1 myintfc1 1 0
See also show drive access
show drive info
show drive productid
show drive revision
show drive serialnumber
show drive status
show drive type
show interface info
show drive productid
Description Shows the product ID of one or more tape drives.
Syntax show drive productid [drive_num] | [all]
Availability All users and modes
Operands Specify a tape drive for which to display the product ID. The
tape drive product ID may be displayed for all tape drives by
specifying all for this operand. This operand is required.
drive_num
Examples To show the product ID for all tape drives:
/>show drive productid all
Tape drive product ID:
Drive Number Product ID
---------------- ----------------
Drive 1 Ultrium 1-SCSI
See also show drive access
show drive info
show drive interface
show drive revision
show drive serialnumber
show drive status
show drive type
show interface info
show drive revision
Description Shows the firmware revision of one or more tape drives.
Syntax show drive revision [drive_num] | [all]
Availability All users and modes
Operands Specify a tape drive for which to display the firmware revision.
The tape drive firmware revision may be displayed for all tape
drive_num
show drive productid 223