HP Interface Manager and Command View for Tape Libraries 3.7 User Guide

Operands Specify a tape drive for which to display the status. The tape
drive status may be displayed for all tape drives by specifying
all for this operand. This operand is required.
drive_num
Examples To show the status for all tape drives:
/>show drive status all
Tape Drive status:
Is Firmware Has
Drive Number serialNumber Status Available Mismatch Errors
------------ -------------- -------- --------- --------- --------
Drive 1 HU72M09167 Green No No No
Drive 2 HU72M09172 Yellow Yes Yes Yes*
*Use the command 'show drive status' with a specific drive number to see
specific errors for this device.
See also show drive access
show drive info
show drive interface
show drive productid
show drive revision
show drive serialnumber
show drive type
show interface info
show drive type
Description Shows the tape drive type for one or more tape drives.
Syntax show drive type [drive_num] | [all]
Availability All users and modes
Operands Specify a tape drive for which to display the type. The type
may be displayed for all tape drives by specifying all for
this operand. This operand is required.
drive_num
Examples To show the tape drive type for all tape drives:
/>show drive type all
Tape drive type:
Drive Number type
---------------- ----------------
Drive 1 Ultrium 1-SCSI
Drive 2 Ultrium 1-SCSI
See also show drive access
show drive info
show drive interface
show drive productid
show drive revision
show drive serialnumber
show drive status
show interface info
show firmware available
Description Shows the firmware files and revisions available to be downloaded to devices.
Syntax show firmware available
Availability All users and modes
Operands None
show drive type 225