HP Interface Manager and Command View for Tape Libraries 3.7 User Guide

/>show interface status all
Interface status:
Firmware Has
Interface Card WW Node Name Status State Mismatch Errors
----------------- ---------------- ------ ------- -------- --------
Interface Card 1 bb5ea468bb5ea354 Green Online No No
Interface Card 2 bb4ff343236bc023 Yellow Offline Yes Yes*
*Use the command 'show interface status' with a specific interface number to see
specific errors for this device.
See also show interface info
show interface wwninfo
Description Shows the World Wide Name (WWN) information for the requested interface
controller or controllers. All WWN information shown is for the node name/ID.
Syntax show interface wwninfo interface_num
Availability All users and modes
Operands Specify the number of the interface. The value may be
changed for all interfaces by specifying all for this
operand. This operand is required.
interface_num
Examples To show WWN info for all controllers:
/>show interface wwninfo all
Interface Card Current WW Name Factory WW Name Mismatch
------------------- ------------------- ------------------- --------
Interface 1 100000e0f202ed73 100000e00202ed71 no
Interface 2 100000e0720309e3 100000e0020309eb yes
See also set interface clearwwnmismatch
set mgmt wwnstate
show library access
Description Shows which hosts have access to the tape library. For each host, the target
LUN that gives the host access to the library is shown.
Syntax show library access
Availability All users and modes
Operands None
Examples To show tape library access information:
/>show library access
Access information for the tape library:
Host Host Name WW Node Name LUN Port
-------- -------------------- -------------------- --- ---
1 myhost1 FFFFFFFFFFFFFFFFFFFF 1 1
See also map host
unmap host
show library info
Description Shows all information pertaining to the tape library.
Syntax show library info
Availability All users and modes
Operands None
Examples To show all information for the tape library:
/>show library info
All tape library information
Tape library name: picker
Tape library firmware status: Green
Tape library product ID: ESL9322
Tape library serial number: 2G33KZ85H002
234 CLI Command Reference