HP Interface Manager and Command View for Tape Libraries 3.7 User Guide

Examples To show the SNMP community strings:
/>show network snmpcommunity
Community Strings:
Read Only IPV4 - public
Read/Write IPV4 - private
Read Only IPV6 - public
Read/Write IPV6 - private
Host IP Trap Community String Filter Ver Type
-------------- --------------------- ------- --- ----
15.146.154.126 public cwi 1 semi
16.78.5.40 public cwi 1 semi
See also “set network snmpcommunity” (page 216)
“set network snmptrap” (page 217)
show partition
Description Shows which devices are assigned to a partition.
Syntax show partition [number] | [all]
Availability All users and modes
Operands Specify the partition number. To show information for all partitions,
use all for this operand.
number
Examples To show information for partition 1 only:
/>show partition 1
To show information for all partitions:
/>show partition all
See also show host access
show robotics status
Description Shows the status of the library robotics.
Syntax show robotics status
Availability All users and modes
Operands None
Examples To show the status of the library robotics:
/>show robotics status
Tape Library robotics status : Red
Tape Library robotics available : Yes
Tape Library robotics Errors:
Error #1 Firmware mismatch detected
See also show library info
show ssh hostkeys
Description Shows the Interface Manager's SSH hostkey fingerprints and exports the public
host keys. This command also makes a copy of the public host keys available
in the ftp public directory.
Syntax show ssh hostkeys
Availability All users and modes
Operands None
Examples /show/ssh>help hostkeys
show partition 243