HP Interface Manager and Command View for Tape Libraries 3.7 User Guide

System contact e-mail address: [e-mail]
System location: mylocation
System asset number: 123456ABCD
System name: mysystemname
See also show system status
show system name
Description Shows the system name.
Syntax show system name
Availability All users and modes
Operands None
Examples To show the system name:
/>show system name
System name: mysystemname
See also set system name
show system info
show system status
Description Shows the system status.
Syntax show system status
Availability All users and modes
Operands None
Examples To show the system status:
/>show system status
System status: Good
See also show system info
synch secmgr
Description If you have made interface controller host access changes directly through the
interface controller Telnet/SSH or serial interface instead of using the Interface
Manager card or Command View TL, the interface controller will be out of
sync with the Interface Manager card. You must then synchronize the settings
which reapplies the Interface Manager card settings to the interface controllers.
Syntax synch secmgr
Availability All users and modes
Operands None
Examples
/>synch secmgr
Do you really want to Synchronize the Secure Manager?
Enter 'y' to continue or 'n' to skip [default='n']: y
Synchronizing the Secure Manager...
Operation status: Synchronizing ACGs.
Operation status: Synchronizing ACGs.
Operation status: Synchronizing ACGs.
Operation status: Finished Synchronizing ACGs
See also None
unmap host
Description Blocks access to all of the current drives for the specified host.
CAUTION: Using this command could force a reboot of some interfaces.
Ensure that no backup jobs are in progress before running this command.
show system name 247