HP Interface Manager and Command View for Tape Libraries 3.7 User Guide

Library TapeAssure views
Library TapeAssure offers three different tabular views.
• Overview tabular view — displays information for all the libraries for which the Library
TapeAssure information is available in the CVTL MS database.
• Partition tabular view — displays information for a selected library for which the Library
TapeAssure information is available in the CVTL MS database.
• Usage tabular view — displays information for all the libraries for which the Library TapeAssure
information is available in the CVTL MS database.
NOTE: Library TapeAssure features are supported for the MSL G3, ESL G3, and MSL 6480
libraries only.
Overview tabular view
The Library TapeAssure Overview tabular view displays information for all the libraries for which
the Library TapeAssure information is available in the CVTL MS database.
To launch the Overview Tabular Data, go to TapeAssure→Libraries→Overview and click on the
Overview node.
If there is no data, then a message is displayed stating:
Library Overview is not available or libraries are using an older
firmware. Please upgrade to an appropriate firmware for the tape
libraries.
Table 14 (page 51) shows the tool tips for the Overview tabular view dialog box.
Table 14 Overview tabular view tool tips for column headers
Tool TipColumn Header
The HP serial number of the library (for support use)Library SN
Description of the libraryLibrary Description
IP addressIP Address
Hostname of the libraryLibrary Hostname
Firmware revision of the libraryLibrary Firmware Revision
Number of storage slotsStorage Slots
Number of drivesLibrary Drives
Number of mail slotsMail slots
Using TapeAssure 51