HP Interface Manager and Command View for Tape Libraries 3.7 User Guide

Table 15 Partition tabular view tool tips for column headers (continued)
Tool TipColumn Header
Number of slots in the partitionNumber of Slots
Number of mail slots in the partitionNumber of Mail Slots
Usage tabular view
The Library TapeAssure Usage tabular view displays information for all the libraries for which the
Library TapeAssure information is available in the CVTL MS database.
To launch the Usage Tabular Data, go to TapeAssure→Libraries→Usage and click on the Usage
node.
If there is no data, then a message is displayed stating:
Library Usage data is not available or libraries are using an older
firmware. Please upgrade firmware for the appropriate tape libraries.
Table 16 (page 53) shows the tool tips for the Usage tabular view dialog box.
Table 16 Usage tabular view tool tips for column headers
Tool TipColumn Header
The HP serial number of the library (for support use)Library SN
Description of the libraryLibrary Description
Hostname of the libraryLibrary Hostname
Total number of moves over the lifetime of the libraryMoves
Total number of power cycles in the libraryLibrary Power Cycles
Total time the library was powered onLibrary Total Power on Time
Power on time since the last power cycleLibrary Current Power on Time
The time at which the last sample was takenLast Sample Time
NOTE: Library TapeAssure features are supported for the MSL G3, ESL G3, and MSL 6480
libraries only.
Empty slots per library
The library empty slots data chart is displayed under the Libraries link in the TapeAssure tab. The
Library empty slots information is displayed in both a tabular and graphical view. The graphical
Using TapeAssure 53