HP P9000 Replication Manager Software 7.2 User Guide

8. Click Close to finish registration.
The information about the instance of HP StorageWorks P9000 for Business Continuity Manager
Software or P9000 mainframe agent is displayed in the BC Manager / Mainframe Agent.
Once an instance of BCM is registered, Replication Manager loads the configuration information
associated with the BCM for the purposes of scanning the volumes as described in “About mainframe
volume discovery” on page 71.
Related topics
• About information sources, page 55
• About volume scans, page 72
• Restrictions when Replication Manager and HP StorageWorks P9000 for Business Continuity
Manager Software versions differ, page 59
When multiple BCM instances have overlapping configuration definition files
If you have an environment where multiple BCM instances have overlapping copy group or disk
configuration definition files, you must use Replication Manager to distribute configuration definition
files from the primary server to the secondary server.
If you do not do this, Replication Manager will recognize existing overlapping configuration definition
files as different configuration definition files. (Under normal circumstances, configuration definition
files on the secondary side should be hidden.)
Restrictions when Replication Manager and HP StorageWorks P9000 for Business
Continuity Manager Software versions differ
The following matrix defines features supported depending on the versions of HP StorageWorks
P9000 for Business Continuity Manager Software and Replication Manager.
Replication Manager version
7.27.1.17.1.07.0.17.06.46.36.26.1
2, 3, 4,
5, 8
2, 3, 4,
5
2, 3, 4,
5
2, 3, 4,
5
2, 3, 4,
5
2, 3, 42, 321
6.1
(6.1)
P9000 for Business
Continuity Manager
Software version
(P9000 mainframe
agent version)
3, 4, 5,
8
3, 4, 53, 4, 53, 4, 53, 4, 53, 4311
6.2
(6.2)
4, 5, 84, 54, 54, 54, 54111
6.3
(6.3)
5, 855551111
6.4
(6.4)
6, 866111111
6.5
(7.0)
7, 811111111
6.6.0
(7.1.0)
User Guide 59