HP P9000 Replication Manager Software 7.4.1-00 User Guide (TB584-96065, April 2013)

NOTE:

By default, alerts are automatically marked as completed when the pair leaves the monitored status.

If the automarking feature has been disabled, the alert must be handled manually. See “Marking

alerts as completed” on page 328 for more information.

About MIB definition files

You can check received SNMP traps using the MIB definition files provided by Replication Manager.

The MIB definition files are created in the following location when Replication Manager is installed:

Replication-Manager-installation-folder\util\mibs

Replication Manager provides the following MIB definition files:

RepMgr-NOTIFICATION-MIB.txt - Defines the MIB for the SNMP traps sent during the monitoring

of copy pair statuses.

RepMgr-NOTIFICATION-MIB2.txt - Defines the MIB for the SNMP traps sent during the monitoring

of performance information and copy license usage.