HP StorageWorks P9000 Replication Manager Software 7.1.1 Configuration Guide (TB584-96029, September 2011)

DescriptionParameter name
Array family of the storage system
Enter the value of arrayFamily shown in the execution results
of the GetServerInfo command.
family
Display name of array family for the storage system.
Enter the value of displayArrayFamily shown in the
execution results of the GetServerInfo command.
displayfamily
User ID for accessing the storage system
userid
User password for accessing the storage system
arraypasswd*
Legend:
* : For XP512/XP48, specify searchcommunity (the SNMP community name of the storage system)
instead of userid and arraypasswd. The default is public.
Command execution example:
Using the information obtained by the GetServerInfo command, specify the value XP1024/128
for both family and displayfamily for the new storage system to be added. The IP address is
assumed to be 10.208.115.127, and the user ID and password are both assumed to be CVXPAE.
hdvmcli AddStorageArray -o "D:\logs\9980V AddStorageArray.log"
ipaddress=10.208.115.127 family=XP1024/128 displayfamily=XP1024/128
userid=CVXPAE arraypasswd=CVXPAE
Command execution results:
An example of the command execution results is shown below. Check the values for arrayFamily,
displayArrayFamily, userID, and ipAddress to make sure that the storage system has been
registered correctly. In this example, you can see that XP1024/128 is specified for arrayFamily
and displayArrayFamily, CVXPAE is specified for userID, and 10.208.115.127 is specified
for ipAddress.
RESPONSE:
An instance of StorageArray
objectID=ARRAY.D800S.83000101
name=D800S@10.208.115.127
description=D800S (83000101) at 10.208.115.127
:
numberOfImReservedLUs=0
List of 1 CommParameters elements:
An instance of CommParameters
userID=CVXPAE
ipAddress=10.208.115.127
ipAddress2=
Environment settings when using the Core CLI License134