HP StorageWorks P9000 Replication Manager Software 7.1.1 Configuration Guide (TB584-96029, September 2011)

2. Make sure that the values output by this command are the same as the values specified in the
RAID Manager configuration definition file, which is stored on the pair management server.
The table below lists the values and settings to be checked.
Table 57 Settings to be checked by the GetHost command
Settings to be checkedValue
This value and the instance number in the configuration
definition file are the same.
The value specified for instanceNumber
in An instance of ConfigFile
This value and the copy group name in the configuration
definition file are the same.
The value specified for groupName in An
instance of ReplicationGroup
This value and the copy pair name defined in the configur-
ation definition file are the same.
The value specified for pairName in An
instance of ReplicationInfo
The following shows an output example of the command and how to specify each value. In this
example, information about two ConfigFile elements(instanceNumber=10 and
instanceNumber=11) is output. The output groupName is SI-CG01-R, and pairName is
P_601-603_0009 and P_602-604_0010.
RESPONSE:
An instance of Host
Checking the pair management server information managed by Device Manager server (for the Core
CLI License)
140